Lathe is capable of shafts, disks, rings and other types of multiple horizontal lathe workpiece machining processes, commonly used in internal and external rotation of the workpiece surface, face, and a variety of internal and external threads, using appropriate tools and accessories, but also drilling, reaming, tapping and rolling flowers. Lathe lathe is the most widely used one, accounting for about 65% of the total number of lathes, because the spindle horizontally placed so called horizontal lathe. Lathe photo shows the ambient temperature is below 30 degrees, relative humidity less than 80%. Generally, NC electric control box with internal cooling fan or exhaust fan to keep the electronic components, especially the central processor operates at a constant temperature or temperature changes very little difference. High temperature and humidity control system will result in reduced component life, and cause failure increases. Increased temperature and humidity, dust generated increases bonded integrated circuit board, and cause a short circuit. Users in the use of the machine, are not allowed to randomly change the parameters set in the control system manufacturer. Setting these parameters directly related to the dynamic characteristics of machine tool parts. Only clearance compensation parameter values ??can be adjusted according to the actual situation. Users can easily replace machine tool accessories, such as using the instructions provided beyond the hydraulic chuck. When setting accessory manufacturer, fully consider all aspects of the matching parameters. Blindness caused by the replacement of part of the parameters do not match, and even cause accidents than estimated. Hydraulic chuck, hydraulic turret, hydraulic tailstock, hydraulic pressure, should be within the allowable stress range, do not allow any increase. Mechanical and electrical equipment installation, Changzhou non-standard machinery manufacturing, steel machine www.lyjngjgc.com nine cattle